เครื่องเชื่อมสายเทอร์โมคัปเปิล TL-WELD-9
รหัสสินค้า: 0028ึ7
เครื่องเชื่อมสายเทอร์โมคัปเปิล Thermocouple Welder TL-WELD-9
FEATURES:
Thermocouple Welder is design for sensor manufacturers and laboratory for the production of commercial grade thermocouple junctions, and for users of large numbers of exposed junction thermocouple such as test and development laboratories where multipoint temperature sensing of test pieces is required. No special skills are needed and most people will be capable of producing quality work with minimal practice. The instrument can be operated via the front panel. It is portable welding machine that allow the thermocouple wires to bond into freestanding beads. Since this is not a gas welder, there is no contamination from a third metal after finished wire bond. Operator only takes a few seconds to bond the standard thermocouple wire into temperature sensors. This model is suitable for welding any type thermocouple wires from 0.1~1.1 mm in diameter. A satisfactory thermocouple junction is produced without using argon, Just 3 steps you can weld a quality bonded thermocouple wire sensor.
Thermocouple Welder is design for sensor manufacturers and laboratory for the production of commercial grade thermocouple junctions, and for users of large numbers of exposed junction thermocouple such as test and development laboratories where multipoint temperature sensing of test pieces is required. No special skills are needed and most people will be capable of producing quality work with minimal practice. The instrument can be operated via the front panel. It is portable welding machine that allow the thermocouple wires to bond into freestanding beads. Since this is not a gas welder, there is no contamination from a third metal after finished wire bond. Operator only takes a few seconds to bond the standard thermocouple wire into temperature sensors. This model is suitable for welding any type thermocouple wires from 0.1~1.1 mm in diameter. A satisfactory thermocouple junction is produced without using argon, Just 3 steps you can weld a quality bonded thermocouple wire sensor.
SPECIFICATIONS:
Model: TL-WELD9
- Voltage Rating: 100~120V or 220~240V AC.
- Store Energy Output: 60 joules Max.
- Wire Gauge:
LO : 40 ~30 AWG (0.1~0.3mm / 0.003”~0.012”)
MED: 30 ~24 AWG (0.3~0.5mm / 0.012” ~0.020”)
HI : 24 ~19 AWG (0.5~1.1mm / 0.020” ~ 0.043”) - Thermocouple Type: Suitable for type K / J/ E/ T/ N/ R/ S/ B
- Weld Cycle: Min 5 to 10 welds / min
- Energy Control: 3 position energy range switch
- Energy Indicator: LED display to indicate charging status.
- Circuit Protect: Circuit protect by 5A breaker
- Suitable use for: Manufacturer / Work Shop / Laboratory /Engineering Dept. / Temperature Test.
- Dimension: 220(W) x 120(H) x 200(D) mm
- Weight: 5 KGS / 11 lbs
เว็บไซต์ที่เกี่ยวข้อง: http://www.truetronix.com
